Kofax INDICIUS 6.0 - Manual (Page 35)

Processing
Getting Started Guide (Classification and Separation) 25
2
Make sure the “Mortgage Apps” batch class is selected.
3
Enter a name for the new batch in the “Name:” box, for example “Mortgage
Applications 2”.
4 Click Scan to display an Import window.
5 Select the images in the following location.
<Installation Path>\examples\Mortgage Applications\Images\Document
Images.
6
Click Open to import the images and establish document boundaries.
Kofax Capture Scan detects the patch code separators placed between each
document and uses this to create the full batch structure (shown in the tree
view).
7
Select Batch | Close and click Yes to the message box.
The Create Batch window will display again.
8
Click Cancel to finish creating batches.
9
Click Batch | Exit to close Kofax Capture Scan.
Classify Documents
Use the Classification and Separation instance of the Recognition module to
automatically classify the documents. Any documents that can not be recognized
confidently will be displayed in the next stage, in Document Review.
X To classify the documents
1
Open Recognition (Classification and Separation) by double clicking on the
“Recognition (Classification and Separation)” desktop shortcut you created
earlier.
2 Select Session | Select Batch.
3 Select the batch created in Scan from the list.
4
Click Ok.
Recognition will begin processing the batch. Information messages will be
displayed and the “Docs Processed” should increment. When “Docs
Processed” reaches 12, the status bar will display “Idle.”
5 Select Session | Exit to close Recognition.