Kofax INDICIUS 6.0 - Manual (Page 45)

Getting Started Guide (Classification and Separation) 35
Chapter 4
Configuration
Overview
Introduction
To create an INDICIUS solution, you first need to configure the INDICIUS modules
using the INDICIUS configuration tools and a set of sample documents. Once you
have created and tested this configuration, you need to assign it to a batch class in
Kofax Capture Administration.
In these tutorials you will replicate the classification and separation elements of the
Mortgage Applications example configuration.
Sample Documents
In order to build your configuration, you need a set of sample documents that
accurately represent the documents you will process in the final solution. Typically
these documents will be exported from a current archive or repository system or
collected from current incoming documents.
Accuracy
The first step when configuring a solution is to use the Document Set Management
features in Transformation Studio to ensure the accuracy of the sample documents.
This is particularly important when building a configuration automatically – if the
input to the training process for classifiers and separators isn't accurate, the output
won't be accurate. The Document Set Management steps are also useful to ensure a
good understanding of the structure of the document set (and that no document
types are missing).