Kofax INDICIUS 6.0 - Manual (Page 98)

Chapter 4
88 Getting Started Guide (Classification and Separation)
Page Classification and Separation Tutorial
Summary
In this section, you will modify the current solution to use automatic document
separation. Automatic document separation can save significant time and cost by
removing the need for patch code separators.
Changes needed to make the current solution into a classification and separation
solution are:
ƒ Change the Recognition configuration to run classification at page level (as it
will run before document boundaries are established) and then to call
separation.
ƒ
Create a page classification and separation configuration for Recognition.
ƒ Configure page classification methods.
ƒ Add in advanced document separation (which will use the page
classification results to determine the document boundaries and document
types).
ƒ Modify the batch class so Kofax Capture Scan does not detect patch code
separators, but imports every scanned image as a page and places them in a
single temporary document.
Create Recognition Configuration
Step 1: Create Configuration
As for document classification, the first step is to create a configuration based on a
template.
X To create a page classification and separation configuration
1 Open Transformation Studio.
2 Open your project.
3 Select Configuration | Create Configuration... to display the New
Configuration window.
4
Select “Page Classification and Separation.”
The Name box will automatically be updated with the default name “Page
Classification and Separation.”