A&D Weighing HC-3Ki - Manual (Page 24)

22
5-3. Unit Weight, Tare & Comparator Limits Memorized
The scale is initially set to store ID numbers with a unit weight only. However, it can be
set to store a tare weight and/or comparator limits also by setting F-Function f-01-05.
1. First register a unit weight and a tare
weight by any method. If necessary, set
the comparator limits.
2. Go to step 2 of section “5-1. Store Unit
Weight By ID Numbers”.
When you recall a unit weight by the ID key, the tare and/or comparator limits
are also recalled along with the unit weight.
888.8. -554
COUNT
WEIGHT UNIT WEIGHT
88 -0.615 8
8
1.10000 STABLE
TARE
ENTERED
ZERO
“id-00”, the special memory area, does not store a tare weight
and comparator limits along with unit weight.