F-09-02 – A&D Weighing HC-3Ki User Manual
Page 38
36
Data Length and Parity
0
3 7 bits, even parity.
1
7 bits, odd parity.
2
8 bits, non parity.
“f-07” and “f-08” are for factory use and should be “0”.
F-09-X
½
key
Operation mode for the
½
key
0
3
Operating as a key to display and/or change comparator
upper and lower limits.
1
Operating as
M-
key to subtract Count data from M+
memory.
2
Operating as a key to toggle the weighing unit between “lb”
and “g”.
Decimal Point and RS-232C Output
0000
3
Decimal point: “
.
”
Header for stable weight data: “ST”
Acknowledgment of command: <ACK><C
R
><L
F
>
Select the decimal point “
.
” or ”
,
” and output
format for RS-232C. Set
0
or
1
for each bit.
Decimal point:
“0” = ”
.
”
“1” = ”
,
”
Header:
“0” = “ST,+001.2346 kg”
“1” = “WT,+001.2346 kg”
Acknowledgment: “0” = ”<ACK><C
R
><L
F
>”
“1” = ”<ACK>”
“f-10”, “f-11” and “f-12” are for factory use and should be “0”.
f-06-05
f-09-01
F-09-01=2 is for
USA version
only.
0000
ST/WT
N.A.
Decimal
ACK Point
f-09-02