AAF International Millennium - Manual (Page 2)

2
• Confirm that the equipment received agrees with the
shipping documents.
• Confirm that the shipping documents agree with the Purchase
Order (P.O.). Refer to the product drawing submitted for the order,
as necessary.
• Confirm that the document package, consisting of a copy of the
IOM, the handrail, ladder, leg and brace installation drawings,
and the electrical connection diagram, has been received with
the shipment.
• If it is determined that modules/assemblies or any other equipment
specified on the P.O. has not been delivered, and is not accounted
for in the shipping documentation, contact AAF International
immediately at 800.477.1214.
The shipment will consist of assembled modules and some
loose parts for attachment at the jobsite, and will include the
following components:
1. Fully assembled plenum, housing and hopper modules.
2. Support structures including leg and bracing assemblies. See
drawings included with shipment for the proper number of parts.
3. Compressed air manifold connection kits for multiple modules.
4. One pulse control assembly for each unit.
5. Filter bags and cages. These filter elements may be shipped and
received separate from the other listed components.
6. Safety hand rails for standard plenum style units.
7. Safety ladder and cage assembly
8. Hardware kit
9. Caulk
NOTE: Anchor bolts for bolting the equipment to the foundations and
hardware for connecting the inlet and outlet ducts are not included
with the Millennium and must be supplied by others.
Optional components such as hopper discharge devices, gauges and
other ancillary equipment may also be included in the shipment.
Consult the P.O. and shipping documents to confirm.
1.3 Assembly
The Millennium has been designed specifically to minimize the
amount of jobsite assembly required. Consult with an experienced
rigger for an accurate estimate of the time and equipment that will be
required. All jobsite assembly will be limited to bolting components
together. NO WELDING WILL BE REQUIRED. Following is an outline
of the assembly required for a standard Millennium. See Figure 1 for
details of the Millennium:
1. Assemble Leg & Brace structure.
2. Seal with caulk and bolt together each adjoining module
(if multiple modules have been supplied).
3. Raise each module/assembly, and then attach and anchor to the
support legs and bracing structure.
4. Install the safety ladder.
5. Install the safety railing.
6. Install compressed air manifold interconnection kit(s) (if multiple
modules have been supplied).
7. Install compressed air manifold customer supplied
condensate drain(s).
8. Connect compressed air supply to the compressed air manifold.
9. Mount and wire the pulse control.
10.Attach inlet and outlet air ducts.
11. Install the filter elements.
12.Install optional components.
Detailed instructions regarding each of these operations are provided
in subsequent sections of this manual.
Figure 1. Millennium Components
NOTE: The modules will normally be bolted together prior to
attaching the legs, handrailing, and ladder.
Safety
Railing
Access
Ladder
Legs &
Bracing
96 Bag
Module
144 Bag
Module