9 start/stop levels, Control panel operating procedures – AERCO KC1000 Low NOx Boiler equipped with C-More 2003 User Manual
Page 29
Advertising

CONTROL PANEL OPERATING PROCEDURES
3-9
BL
OWE
R
BU
RN
E
R
Figure 3-6.
Air/Fuel Valve In Ignition Position
8. With the unit firing properly, it will be
controlled by the temperature controller
circuitry. The FIRE RATE will be continu-
ously displayed on the front panel bargraph.
9. Once the demand for heat has been
satisfied, the Control Box will turn off the gas
valve. The blower relay will be deactivated
and the Air/Fuel Valve will be closed.
Standby
will be displayed.
3.9. START/STOP
LEVELS
The start and stop levels are the fire rate
percentages that start and stop the unit, based
on load. These levels are Factory preset as
follows:
• Start
Level: 20%
• Stop
Level: 16%
Normally, these settings should not require
adjustment.
Advertising