27 general ladder diagram, 28 e8 controller and bcm terminal assignments – AERCO Modulex EXT 321 - 1123 User Manual

Page 60

Advertising
background image

MODULEX EXT 321, 481, 641, 802, 962, 1123 BOILERS

Installation, Operation & Maintenance Manual

3.27 General Ladder Diagram

Figure 3-31: General Ladder Diagram

3.28 E8 Controller and BCM Terminal Assignments

On the rear panel of the E8 controller, there are two terminal blocks, one of which is for the
mains (120 V) connections, and the other for the low voltage connections.

The main controls, necessary for the C/H system management and for the boiler control, as well
some components which are part of the boiler housing, must be connected to the terminal
blocks. See Figure 3-32 for a wiring diagram showing the E8 controller terminal wiring, and see
Figure 3-33 for a wiring diagram of sensor and BCM terminal wiring.

Page 60 of 148

AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913

OMM-0087_0E

12/01/14

Phone: 800-526-0288

GF-143

Advertising