AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes User Manual

Page 10

Advertising
background image

Configuring Analog Extensions with AudioCodes Gateways

Page 10 of 25

7.

Select VoIP > SIP Definitions > General Parameters.

Figure 13: Configure the general SIP parameters

•

Make sure that NAT IP Address is 0.0.0.0.

•

Set Enable Early Media to Disable.

•

Set SIP Transport Type to UDP.

•

Set SIP UDP Local Port to 10060.

•

Set SIP Destination Port to 10060.

Advertising