AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes User Manual

Page 8

Advertising
background image

Configuring Analog Extensions with AudioCodes Gateways

Page 8 of 25

3.

Select VoIP > Media > RTP/RTCP Settings.

Figure 9: Configure the Media RFC 2833 Payload settings

4.

Select VoIP > Media > General Media Settings.

Figure 10: Configure the general media settings

•

Set both RFC 2833 TX Payload Type and

RFC 2833 RX Payload Type to 101.

•

Make sure that NAT Traversal is set to

Disable, so that it will not conflict with

MaxCS’s NAT Traversal.

Advertising