AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes - Manual (Page 13)

Configuring Analog Extensions with AudioCodes Gateways Page 13 of 25
11. Select VoIP > GW and IP to IP > Hunt Group > Hunt Group Settings. Configure Entry 1 as follows.
Figure 17: Configure hunt group settings
12. Select VoIP > GW and IP to IP > Routing > IP to Hunt Group Routing. Configure Entry 1 as follows:
Figure 18: Configure hunt group routing rules
• Enter 1 for the Hunt Group ID.
• Set Channel Select Mode to By Dest Phone Number.
• Set Registration Mode to Per Endpoint.
• Make sure Serving IP Group ID is blank.
• Set the first five fields, Dest. Host Prefix, Source Host Prefix,
Dest. Phone Prefix, Source Phone Prefix, and Source IP Ad-
dress, to
*
.
• Set Hunt Group ID to 1. (This assumes that the FXS port's hunt
group ID is 1.)