AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes - Manual (Page 16)

Configuring Analog Extensions with AudioCodes Gateways Page 16 of 25
17. Select VoIP > GW and IP to IP > Analog Gateway > Caller ID Permissions. Enable for Caller ID for all ports.
Figure 23: Enable Caller ID
18. Select VoIP > GW and IP to IP > Analog Gateway > Authentication. Configure the entry Port 1 FXS as fol-
lows:
Figure 24: Configure authentication settings
• Set User Name to 167.
• For the password, enter 5656.
(This is the extension and password you set up on page 4.)
Note: If you save and then restore the .ini file under Mainte-
nance > Software Update > Configuration File, due to
AudioCodes’ security concern, the password will be
erased. You will need to re-enter the password here, after
you restore the .ini file.)