AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes User Manual
Page 6
Configuring Analog Extensions with AudioCodes Gateways
Page 6 of 25
6.
Select VoIP > Enterprise Network Management > Servers > IP Codec > IP Device Range. Add the Fire-
wall/NAT's public IP address range.
Figure 5: Configure the IP Device range
7.
Open the MaxAdministrator Boards view. Double click the SIPSP entry, select Board Configuration, and
click Advanced Configuration. Add 10.40.0.95 to the Trusted SIP Device List.
If this IP address is not included in the list, then it will be treated as a malicious SIP device due to excessive
SIP messages from that address.
Figure 6: Add the firewall/NAT public address to the Trusted SIP Device list
•
Set both the From and the To fields to
10.40.0.95 (as shown in Figure 1)
•
For the Codec, select OnPremise.