American Access Systems Touch Plate Reader - 11-65000 - Manual (Page 13)

Page 13 American Access Systems / Security Brands, Inc.
door ControL
The 11-65000 provides complete control of the passageway via the menu system. Some door control functions may
also be performed using the Programming Deck.
Remote Open Via the Menu
To open the door using the menu system, choose 3 (Door Control) from the Main Menu and then 1 (Open Door Now)
from the Door Menu. You will be asked if you are sure. If you answer yes, the door will be opened for the same latch
time period as when a card is used to open the door. An appropriate message will be recorded and sent to the PC
(if monitoring real-time transactions) or Printer (if connected). See page 11 for Remote Open Using Inputs.
door Unlock Mode
The relay may be set to stay latched (door unlocked) during periods when access control is unwanted. While in the
“DOOR UNLOCK” mode, the relay stays activated, and the LED indicator will flash green approximately once every
second. The unit may not be programmed with the programming deck, nor will it recognize Access Cards while in
the “DOOR UNLOCK” mode.
DOOR UNLOCK VIA THE MENU . To activate the Door Unlock mode, choose 3 (Door Control) from the Main Menu.
Then choose 2 (Unlock Door Indefinitely) from the Door Menu. An appropriate message will be recorded and will be
sent to the PC (if monitoring real-time transactions) or Printer (if connected). To deactivate the Door Unlock Mode,
choose 5 (Return To Normal Mode) from the Door Menu or place the “ACTIVE/INACTIVE” card of the Programming
Deck on the TOUCH CARD® reader plate and remove it DOOR UNLOCK USING THE PROGRAMMING DECK. To set
the unit to the DOOR UNLOCK Mode, place the “*” (THRU) card on the TOUCH CARD® reader plate, remove it
and place the “ACTIVE/INACTIVE” card on the TOUCH CARD® reader plate and remove it.
To return the 11-65000 to normal operation, place the “ACTIVE/INACTIVE” card on the TOUCH CARD® reader plate
and remove it or choose 5 (Return To Normal Mode) from the Door Menu.
door Unlock Until a Set time
Using the Menu System, the 11-65000 may be put into the door unlock mode until a user selected date and time.
Choose 3 (Door Control) from the Main Menu. Then choose 3 (Door Unlock Until A Set Time). From the dialog box
enter the date and time that the Door Unlock mode is to expire. An appropriate message will be recorded and sent
to the PC (if monitoring real-time transactions) or Printer (if connected).
You may cancel the door unlock mode at any time choosing 5 (Return To Normal Mode) from the Door Menu or
placing the “ACTIVE/INACTIVE” card of the Programming Deck on the TOUCH CARD® reader plate and removing it.
Incative Mode
The 11-65000 may be made inactive for entry with a card by placing the “ACTIVE/INACTIVE” card of the
Programming Deck on the TOUCH CARD® reader plate and then removing it. You may also choose 3 (Door Control)
from the Main Menu and then 4 (Make Reader Inactive Indefinitely) from the Door Menu. An appropriate message
will be recorded and sent to the PC (if monitoring real-time transactions) or Printer (if connected).
OOR UNLOCK USING THE PROGRAMMING DECK. To set the unit to the DOOR UNLOCK Mode, place the “*” (THRU)
card on the TOUCH CARD® reader plate, remove it and place the “ACTIVE/INACTIVE” card on the TOUCH CARD®
reader plate and remove it.
To return the 11-65000 to normal operation, place the “ACTIVE/INACTIVE” card on the TOUCH CARD® reader plate
and remove it or choose 5 (Return To Normal Mode) from the Door Menu.
door Unlock Until a Set time
Using the Menu System, the 11-65000 may be put into the door unlock mode until a user selected date and time.
Choose 3 (Door Control) from the Main Menu. Then choose 3 (Door Unlock Until A Set Time). From the dialog box
enter the date and time that the Door Unlock mode is to expire. An appropriate message will be recorded and sent
to the PC (if monitoring real-time transactions) or Printer (if connected).
You may cancel the door unlock mode at any time choosing 5 (Return To Normal Mode) from the Door Menu or
placing the “ACTIVE/INACTIVE” card of the Programming Deck on the TOUCH CARD® reader plate and removing it.
Incative Mode
The 11-65000 may be made inactive for entry with a card by placing the “ACTIVE/INACTIVE” card of the
Programming Deck on the TOUCH CARD® reader plate and then removing it. You may also choose 3 (Door Control)
from the Main Menu and then 4 (Make Reader Inactive Indefinitely) from the Door Menu. An appropriate message
will be recorded and sent to the PC (if monitoring real-time transactions) or Printer (if connected).
* + ACtIVe/InACtIVe
* + ACtIVe/InACtIVe