American Access Systems Touch Plate Reader - 11-65000 - Manual (Page 14)

Page 14 American Access Systems / Security Brands, Inc.
SYSteM SettInGS
date and time
The 11-65000 stores 5000 transactions. In order to know when a transaction has occurred, it is necessary to set the
internal clock to the correct date and time. Time is kept in a 24 hour (military) manner. Even if you do not intend to
use transaction information, it is necessary to set the date and time for proper operation of Time Zones. Once set, the
Automatic Daylight Savings Time Adjustment feature will automatically change the time to activate and de-activate
Daylight Savings Time (See page 35).
Note that the 28SA-Plus and the various Secura Key software programs are all “Year 2000 Compliant.”
Setting date and time Using the Menu
To set the date and time choose 4 (System Settings) from the Main Menu. Then select 1 (Date) from the System
Settings Menu to set the date followed by 2 (Time) from the System Settings Menu to set the time.
Setting the date and time Using the Cards
To set the date, place the cards on the TOUCH CARD® reader plate that represent the month (1 - 12), then place
the “*” on the TOUCH CARD® reader plate, then place the cards on the TOUCH CARD® reader plate that represent
the day of the month (1 - 31), then place the “*” on the TOUCH CARD® reader plate, then place the cards on the
TOUCH CARD® reader plate that represent the last two digits of the year (e.g., 99), then place the “SET TIMER” card
on the TOUCH CARD® reader plate and remove it.
Example: Set date to 9/28/99.
Place the “9” card on the TOUCH CARD® reader plate and remove it. Then place the “*” card on the TOUCH
CARD® reader plate and remove it, and place the “2” card on the TOUCH CARD® reader plate and remove it, and
place the “8” card on the TOUCH CARD® reader plate and remove it, and place the “*” card on the TOUCH CARD®
reader plate and remove it. Then place the “9” card on the TOUCH CARD® reader plate and remove it and place
the “9” card on the TOUCH CARD® reader plate and remove it. Then place the “SET TIMER “ card on the TOUCH
CARD® reader plate and remove it.
To set the time, place the cards on the TOUCH CARD® reader plate that represent the hour (0 - 24), then place the
“*” on the TOUCH CARD® reader plate and remove it, then place the cards on the TOUCH CARD® reader plate that
represent the minutes (0 - 60), and then place the “SET TIMER” card on the TOUCH CARD® reader plate and remove
it.
Example: Set time to 13:27 hours (1:27 pm).
Place the “1” card on the TOUCH CARD® reader plate and remove it, then place the “3” card on the TOUCH
CARD® reader plate and remove it. Then place the “*” card on the TOUCH CARD® reader plate and remove it,
then place the “2” card on the TOUCH CARD® reader plate and remove it, then place the “7” card on the TOUCH
CARD® reader plate and remove it. Then place the “SET TIMER” card on the TOUCH CARD® reader plate and
remove it.
Latch timer
The output from the relay may be set to any number of seconds from 1 to 30. Setting the latch timer to “0” produces
a 0.25 second output, timed from when a valid card is placed on the TOUCH CARD® reader plate.
Setting the Latch timer Via the Menu
To set the Latch Timer using the Menu System, choose 4 (System Settings) from the Main Menu. Then from the System
Settings Menu, select 3 (Latch Timer).
Setting the Latch timer Using Cards
To set the Latch Timer using the Program Deck, place on the TOUCH CARD® reader plate the sequence of Program
Cards representing the number of seconds the latch is to be on, then place the “SET TIMER” card on the TOUCH
CARD® reader plate and remove it.
Example: Set latch timer for 15 seconds.
Place the “1” card on the TOUCH CARD® reader plate, remove it and place the “5” card on the TOUCH CARD®
reader plate, remove it and place the “SET TIMER” card on the TOUCH CARD® reader plate, and remove it.
9 + * + 2 + 8 + * + 9 + 9 + Set tIMer
1 + 3 + * + 2 + 7 + SET TIMER
1 + 5 + Set tIMer