American Access Systems Touch Plate Reader - 11-65000 - Manual (Page 18)

Page 18 American Access Systems / Security Brands, Inc.
real Soft
If the Time Zone is set for Real Soft Antipassback, basic operation is similar to Real Hard Antipassback. The term “soft”
means that access will not be denied to cards used twice in succession at an IN reader, but that an error message will
be recorded and sent to the PC (if monitoring real-time transactions) or Printer (if connected).
timed Soft
If the Time Zone is set for Timed Soft Antipassback, access will not be denied to cards used twice in succession before
the Antipassback Waiting Time has expired, but an Antipassback error message will be recorded and sent to the PC
(if monitoring real-time transactions) or Printer (if connected). This applies to both Primary and Remote Readers.
If a Time Zone is set to Antipassback “Off”, Access Cards programmed into that Time Zone will not be affected by
Antipassback.
To set the Time Zone Antipassback status, choose “A” when in the Weekly Schedule. Then choose 1 - Timed Hard, 2 -
Timed Soft, 3 - Real Hard, 4 - Real Soft, 5 - Off, or ESC to exit.
door Unlock time Zone
The Door Unlock Time Zone is a special Weekly Schedule that puts the 11-65000 into the Door Unlock Mode during
days of the week and times of the day where time segments are set to be “on.” To set or edit the Door Unlock Time
Zone, choose 4 (System Settings) from the Main Menu. Then choose 8 (Time Zones) from the System Settings Menu and
2 (Door Zone) from the Time Zone Menu.
Once in the Weekly Schedule for the Door Time Zone, select the number of the day to be edited. The cursor will move
up to the day chosen. An “*” indicates the one half-hour segment is on, a blank space indicates that the segment
is off. Using the arrow keys, move the cursor to the segment to be changed and use the space bar to turn the time
segment off. Use any other key to turn the segment on. The 11-65000 will be in the Door Unlock Mode during those
time segments that are “ON”.
Choose D to set the Door Zone Mode Option, which allows a Door Zone to be set to either (A) Auto Open or (C) Card
Open. In Auto Open Mode, the door unlocks automatically when the Door Zone begins. In Card Open Mode, the
door remains locked when the Door Zone begins, and unlocks when the first valid card is used. Card Open Mode
should be selected when it is important that the controlled door remains locked whenever the reader location is
unattended.
Define Holidays
Up to 32 holidays may be defined. When one of the defined holidays occurs, the holiday schedule of the particular
time zone is followed rather than the weekday schedule. Holidays may be defined for the particular year or they
may be defined to re-occur every year. If a particular year is entered when defining a holiday, the Weekly Time Zone
schedule will treat only that date of the year specified as a holiday. If, instead of entering a year, a “Y” is entered,
then the specified date will be treated as a holiday every year.
To define or edit the Holiday list, choose 4 (System Settings) from the Main Menu. Then choose 8 (Time Zones) from the
System Settings Menu and 3 (Define Holidays) from the Time Zone Menu.
Once in the Holiday Setting Menu, select the number of the Holiday to be set or edited and enter the appropriate
date. DAYLIGHT SAVINGS TIME
The 11-65000 provides Automatic and Manual Daylight Savings Time correction. In the Automatic Mode, Daylight
Savings Time is corrected on the first Sunday in April and the last Sunday in October at 2:00 AM every year. The
Manual Mode is provided to allow the user to set the beginning and ending Daylight Savings Time dates in areas
where the Automatic mode does not correspond to the actual days of change.
For areas where there is no Daylight Savings Time, the correction function may be disabled. The factory default is
Automatic Daylight Savings Time Correction.
To set the Daylight Savings Time Correction status, choose 4 (System Settings) from the Main Menu. Then select 8 (Time
Zones) from the System Settings Menu followed by 4 (Daylight Savings Time) from the Time Zone Menu. The Daylight
Savings dialog box will show the current mode and the current beginning and ending dates for Daylight Savings Time.
Choose “A” to select the Automatic Mode. Choose “O” to deactivate Daylight Savings Time Correction. To set the
unit for Daylight Savings Time dates of your choice, choose “M” (Manual) and then enter the desired beginning and
ending dates by choosing “B,” then “E.”
transactions
The 11-65000 stores 5000 date and time stamped transactions. When the transaction buffer is full, the oldest entries
are deleted as new transactions occur; therefore, the newest transactions are always available.
DISPLAY STORED TRANSACTIONS
To display the transactions that are stored in the transaction buffer, choose 6 (Transactions) from the Main Menu
and then 1 (Display Stored Transactions) from the Transaction Menu. Transactions will be displayed in reverse
chronological order (newest transactions first).
Display Transactions as They Occur TRANSACTIONS AS THEY OCCUR
Transactions may be displayed to the screen of the PC or terminal as they occur. When in this mode, the automatic
log off feature is disabled. Error messages will also include a bell or buzzer sound (depending on the terminal or PC
used).