Temperature correction factors for membrane – AXEON R2-Series User Manual
Page 29
Advertising
29
R2-Series User’s Manual
11/13/12
MKTF - 212
TEMPERATURE CORRECTION FACTORS FOR MEMBRANE
Find the temperature correction factor (TCF) from the table below. Divide the rated permeate flow at 77°F
by the temperature correction factor. The result is the permeate flow at the desired temperature. (See
example on the next page). If a system is rated to produce 5 gpm of permeate water @ 77˚ F. The same
system will produce more water at a higher temperature. It will also produce less water at a lower
temperature. Use the temperature correction table to obtain the correct flow.
Example:
Advertising