Practical interior accessories, Vehicle equipment, Integrated universal remote control – BMW 2012 3 Series M3 Сoupe User Manual

Page 123

Advertising
background image

122

Controls

Practical interior accessories

Practical interior accessories

Vehicle equipment

In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. For this reason, descrip-
tions will be given of some equipment that may
not be available in a vehicle, for example due to
the special options or national-market version
selected. This also applies to safety related
functions and systems.

Integrated universal remote

control

The concept

The Integrated universal remote control can be
used to operate up to 3 functions of remote-
controlled devices such as garage door open-
ers or lighting systems. The Integrated univer-
sal remote control thus replaces as many as
three different hand-held transmitters. To oper-
ate them, the buttons on the interior rearview
mirror must be programmed with the desired
functions. Programming requires the hand-held
transmitter for the respective device.

To prevent possible damage or injury,
before programming or using the inte-

grated universal remote control to operate a
device, always inspect the immediate area to
make certain that no people, animals or objects
are within the pivoting or travel range of the
device being operated.
Also follow the safety instructions supplied with
the hand-held transmitter.

<

For security reasons, make sure to delete the
stored functions before selling the vehicle, refer
to page

124

.

Compatibility

If this symbol appears on the package
or in the instructions supplied with the
device to be operated, you can gener-

ally assume that the device is compatible with
the Integrated universal remote control.
For additional questions, please consult:

>

Your BMW center.

>

www.homelink.com on the Internet.

HomeLink is a registered trademark of Johnson
Controls, Inc.

Controls on the interior rearview mirror

1 LED
2 Buttons
3 Hand-held transmitter, required for pro-

gramming.

Programming

General information

1.

Switch on the ignition.

2.

Initial operation:
Simultaneously hold down the right and left
buttons on the inside mirror for approx.
20 seconds until the LED on the inside mir-
ror flashes.
All programs of the buttons on the rearview
mirror are deleted.

Online Edition for Part no. 01 40 2 609 333 - © 08/11 BMW AG

Advertising