BMW 2012 3 Series M3 Сoupe - Manual (Page 83)

82
Controls Controls overview
Controls overview
Vehicle equipment
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. For this reason, descrip-
tions will be given of some equipment that may
not be available in a vehicle, for example due to
the special options or national-market version
selected. This also applies to safety related
functions and systems.
Odometer, outside
temperature display, clock
1 Knob in the instrument cluster
2 Outside temperature display and clock
3 Odometer and trip odometer
Knob in the instrument cluster
> To reset the trip odometer while the ignition
is switched on
> To display the time, outside temperature
and odometer briefly while the ignition is
switched off
Units of measure
To select the respective units of measure, miles
or km for the odometer as well as
7 or 6 for
the outside temperature, refer to page 87 .
The setting is stored for the remote control cur-
rently in use.
Time, outside temperature display
Setting the time, refer to page 90 .
Outside temperature warning
When the displayed temperature sinks to
approx. +37
7/+36, a signal sounds and a
warning lamp lights up. There is an increased
risk of black ice.
Black ice can also form at temperatures
above +37
7/+36. You should there-
fore drive carefully on bridges and shaded
roads, for example; otherwise, there is an
increased risk of an accident.
<
Odometer and trip odometer
Resetting the trip odometer:
With the ignition switched on, press button
1 in
the instrument cluster.
When the vehicle is parked
If you still want to view the time, outside tem-
perature and odometer reading briefly after the
remote control has been taken out of the igni-
tion lock:
Press button
1 in the instrument cluster.
Online Edition for Part no. 01 40 2 609 333 - © 08/11 BMW AG