Speed limit – BMW 2012 3 Series M3 Сoupe User Manual

Page 94

Advertising
background image

93

Controls overview

Controls

These messages can be hidden for approx.
8 seconds. After this, they are displayed
again automatically.

They are marked with the symbol
shown here.

>

Other Check Control messages are hidden
automatically after approx. 20 seconds.
They are stored and can be displayed again
later.

They are marked with the symbol
shown here.

Displaying stored Check Control
messages

1.

Push button

1 in the turn signal/high beam

lever up or down repeatedly until the appro-
priate symbol appears in the display,
accompanied by the words "CHECK
CONTROL".

2.

Press button

2.

If there are no Check Control messages,
then "CHECK OK" is displayed.
If a Check Control message has been
stored, the corresponding lamp lights up. It
is accompanied by a text message on the
Control Display.

3.

Push button

1 to check for other messages.

4.

Press button

2.

The display again shows the outside tem-
perature and the time.

Via iDrive

1.

"Vehicle Info"

2.

"Vehicle status"

3.

"Check Control"

4.

Select the text message.

Speed limit

You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph or 5 km/h.

Displaying, setting or changing the

limit

1.

"Settings"

2.

"Speed"

3.

"Warning at:"

4.

Turn the controller until the desired speed
is displayed.

5.

Press the controller.

The speed limit is stored.

Online Edition for Part no. 01 40 2 609 333 - © 08/11 BMW AG

Advertising