BMW 2012 3 Series M3 Сoupe User Manual
Page 207
206
Communications
Telephone
5.
Select the desired additional function:
>
"Additional telephone"
>
"Office"
>
"Bluetooth® audio"
If an additional function is deactivated, it cannot
be assigned to a phone.
Pairing and connecting a device
Only pair the device when the vehicle is
stopped; otherwise, inattention may lead
to endangerment of passengers or other road
users.
<
1.
"Telephone"
2.
"Bluetooth® (phone)"
3.
"Add new phone"
The Bluetooth name of the vehicle is dis-
played.
4.
To perform other operations on the mobile
phone, refer to the owner's manual for the
device: e.g. search for and connect Blue-
tooth device or a new device.
The Bluetooth name of the vehicle appears
on the mobile phone display.
5.
Select the Bluetooth name of the vehicle on
the mobile phone display.
You will be prompted by iDrive or the mobile
phone to enter the same Bluetooth pass-
key.
6.
Enter the passkey and confirm.
7.
Select the functions for which the mobile
phone is to be used.
8.
"OK"
If pairing was successful, the mobile phone
appears at the top of the list of devices.
Functions supported by the mobile phone and
audio device are displayed as symbols during
the pairing.
White symbol: function active.
Gray symbol: function inactive.
Four devices can be paired with the vehicle
simultaneously. Three devices can be con-
nected to the vehicle simultaneously.
If the pairing was not successful: what to do if…,
refer to page
Following the initial pairing
>
The mobile phone is detected/connected in
the vehicle within a short period of time
when the engine is running or the ignition is
switched on.
>
The phone book entries of the telephone
that are stored on the SIM card or the
mobile phone are imported into the vehicle
once the device is detected, depending on
the mobile phone.
Symbol
Function
Telephone
Auxiliary phone
Audio source
Online Edition for Part no. 01 40 2 609 333 - © 08/11 BMW AG