CAMCORP Cartridge Collector - Manual (Page 37)

Phone 800-323-2593
630-231-5900
Fax 630-231-1377
National Controls
Corporation
4
Contents
Previous
Next
4-13
National Controls Corporation offers NEMA 4 type enclosures for mounting our controls. These enclosures are made of heavy gauge steel and have a
continuous hinge cover. All seams are continuously welded. The finish is gray hammer-tone enamel inside and out, over phosphatized surfaces.
Note. In order to keep abreast of the latest technology, National Controls Corporation reserves the right to change components and/or design of
controls without notice.
Accessories:
Description Dimensions Part Number
NEMA-4 BOX BOX-A1008-CHNF
NEMA-4 BOX BOX-A1210-CHNF
10” x 8” x 4”
12” x 10” x 5”
On/Off Switch NEMA-4 Rated w/Legend Plate MSW-0DPST-011
8.25
8.75
6.250
6.875
.25
.31
.25 Dia. Hole
(4 Pl.)
Voltage
Input
C 1 2
Solenoid Valve
OFF & ON Time
Adjustments
Program Wire-
Determines number
of outputs to be
activated
Pressure Switch Input-
For on demand cleaning.
(Controls are shipped with
inputs shorted out)
(4250-3 10/92)
NOTE: Not all components are shown.
OFF ON
3 AMP
OUTPUTS (-)
12-24VDC ONLY
+ - (+)
+
-
DC
3 4 5 6 7 8 9 10
.625
2.0 Max.
.050 Aluminum
Chassis
#6 screw typ.
Important Notice to Users:
Our timers are capable of use in a
wide array of devices and in various
applications. Any device or system
incorporating a timer should be so
designed that, in the event of failure,
malfunction or normal wear-out of
the timer, the system will become
inoperative in a manner which will
prevent property damage or bodily
Injury.
Caution:
1. Do not mount controls in high
vibration areas without shock
mounts.
2. Do not mount controls in areas of
high dust or corrosive atmospheres
without a protective enclosure.
3 Do not use a converter or inverter
for the power source.
4. Do not mount control in high
transient voltage areas without an
isolation transformer
5. Do not leave control box open.
6. Do not allow a local repair shop to
repair the controls, as we employ
some very sophisticated components
that could be further damaged. For
service, call us directly: 800-323-2593