CAMCORP CAM-AIRO Vertical Cartridge User Manual
Page 46
CAMCORP, INC.
Phone: 913-831-0740 Fax: 913-831-9271
www.camcorpinc.com
Pressure Drop – Another term for differential pressure or the drop in pressure
between two measured points.
Re-Entrainment – The re-depositing of dust on the filter media after it has been
cleaned off. This can be caused by turbulence in the hopper (or dirty air plenum)
or by excessive airflow through the dust collector.
Solenoid Valve – In the case of a dust collector, a solenoid valve is used to
open and close a diaphragm valve. It does this by venting compressed air from
the backside of the diaphragm which allows the diaphragm to open.
Smart Timer Board – A timer that senses the differential pressure and only
cleans (pulses) the filter media when differential pressure is high (when the bags
/ cartridges are dirty). This provides for more economical use of compressed air.
The Smart Timer also provides additional features not available on a standard
timer. See Section 5 on Smart Timers for more details.
Tubesheet – The steel plate that supports the filter media (bags or cartridges).
This plate separates the dirty air plenum from the clean air plenum.
8-2