CAMCORP CAM-AIRO Vertical Cartridge User Manual
Page 7
CAMCORP, INC.
Phone: 913-831-0740 Fax: 913-831-9271
www.camcorpinc.com
01(
- -
21
. 3
+ 24
Accessory Parts
•
This includes all gauges, nylon or copper tubing, valves, gaskets and
other parts not specifically called out.
•
These items should be stored inside a cool dry place protected from
moisture, insects, and rodents.
Fan and Fan Accessories
•
Fans can be stored outside on a pallet or skid to keep them out of water
and dirt.
•
Fan silencers, outlet dampers, and inlet boxes should also be tarped and
stored on a pallet or skid.
•
Reference fan IOM manual for long-term storage.
Ducting
•
Ducting can be stored outside on a pallet or skid to keep it off the ground.
It should be positioned so that water does not sit on or in the ducting.
•
If ducting is unpainted carbon steel it should be at least primed coated
before storage.
•
If ducting is already finish coated, it should be tarped to protect the finish,
but this is not absolutely necessary.
Knife Gate
•
All limit switches, solenoids, and air cylinder ports must be capped and
taped to prevent any moisture or dirt from entering.
•
Equipment can sit outside provided it is covered with a tarp and is on a
pallet or skid to keep it out of water and dirt.
•
Reference knife gate IOM manual for long-term storage.
2-3