Surface burners – Whirlpool FGP315B User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C A R I N G F O R Y O U R R A N G E
Surface burners
1. Romov«
the cooktop, following the
instructions on page 18.
2. Wipe off
surface burners with warm,
soapy water arxf a sponge after each use.
To remove cooked^ food, soak
the
burners in a vmegar and water solution for
20-30 minutes.
Scrub
with a plastic
scrubbing pad.
3. If ports are clogged, clean with a
straight pin. DO NOT enlarge or distort
the ports. DO NOT use a toothpick to
clean the ports.
4. Occasionally check
the burner flames
for proper size and shape as shown. A
go(^ flame is blue in color. If flames lift off
ports, are yellow, or are noisy when
turned off, you may need to clean the
burners (see above), or call a qualified
technician for adjustment.
5.
Replace
cooktop.
Typical surface burner fiante
at the highest setting
19