GE 51136 GE Outdoor Outlet Receiver with Keychain Remote Smart Remote Plus Compatible - Manual

Outdoor Lighting Kit
User's Manual
Enclosed you will find
ID Outdoor Receiver Module
ID Key Chain Remote Control
Any transmitter in the GE SmartHome™
product line is capable of controlling every
receiver-the ultimate in home convenience.
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.
c®us
LISTED
6
/
01/06 51136-2
A
WARNING
Risk of electric shock
• Keep children away
• Do natuseinwetlacations
• Fully insert plug
• When used outdoars, plug
into GFCI protected outlet
Risk of fire
• Do not exceed electrical ratings
The following GE SmartHome™ transmitters Isold separately) can control THIS receiver:
0
o
1
1
u
Wireless
Remote rronsm/tter
RFIO^rXPS
The transmitters above can also control the following GE SmartHome™ receivers (sold separatelyl:
Key C/io/n Remote
RFIOOrXPS
Whole-Home Control
RROOOKiNPS
Motion-Sensing Control
RFS13TX
V
Indoor
Receler Module
RFIOORXPS
Outdoor Receiver Module
RF106RXPS
Soáet Adapter
RF104RXPS
Wall Switch
RF102RXPS
IMPORTANT! These devices are NOT compatible with devices from other systems.
You must purchase GE SmartHome™ transmitters and receivers to ensure compatibility.
Operate a lamp or
appliance by remote control.
Expanding your system
The GE SmartHome™ devices operate on any of 8 user-settable channels. The channels are
easy to set /adjust
-
with the simple turn of a knob. Set up your GE SmartHome™ by purchasing
as many transmitters and receivers as you need. The following table is just one example of how
you can configure your GE SmartHome™ system;
Area CH Transmitters Receivers
Bedroom
1
Bedside - Wireless Remote Transmitter
EntrarKe - Wireless RemoteTronsmitter (2) Bedside Lamps-(21 Socket Adapters
Corner Torchiere- Indoor Recewer Module
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Receiver Module
LwingRoom 2 Coffee Table - Timer/Contioller
EntrarKe - Wireless RemoteTronsmitter
(2) End Table Lamps - (2) Socket Adapters
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Receiver Module
Christmas Tree - Indoor Receiver Module
3
Window Santa - Indoor Receiver Module
Lighted Poinsettio - Indoor Recewer Module
Basement 4 Entra noe - Wireless Rerrrote Transmitter (4)Overhead Con nxlures-(4lSocketAdapters
(2) Fluorescent Rxtures- (2) Indoor Receiver Modules
Garage
5 Entra noe - Wireless Rerrrote Transmitter (21 Fluorescent Rxiures-121 Outdoor Receiver Modules
Overhead UghtFixture-Woll Switch
Outdoor
6
Foyer-Wireless RemoteTronsmitter
CarKeys- Chain Remote
Entry Ught-WalSwitch
Coach Lantern-Wall Switch
7
Christmas Lights- Outdoor Receiver Module
Yard Santa
- Outdoor Receiver Module
Kitchen 8 Entrance-Wireless RemoteTronsmitter Coffee Maker- Indoor Recewer Module
Isa trademark of the
General Electric Company
and is used under license to
Jasco Products Company LLC,
311 N.W. 122nd Street.
Oktahoma City, OK 73114
wwwjascoproducts.com.
90 DAY LIMITED WARRANTY: Jasco
Products Company warrants this product
to be free from manufacturing defects for
0
period of ninety days from the original
dote of consumer purchase. This warranty
is limited to the repair or replacement of
this product only and does not extend to
consequential or incidental damage to
other products that may be used with this
unit. This warranty is in lieu of all other
warranties express or implied. Some
states do notallow limitations on how long
an implied warranty lasts or permit the
exclusbn or limitation of incidental or
consequential damages, so the above
limitations may not apply to you. This
warranty gives you specific rights, and you
may also have other rights which vary
from state to state. If unit should prove
defective within the warranty period,
return prepaid with dated proof of
purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City. OK. 73114
Operating Instructions - Outdoor Outlet Adapter
1. Remove the small tab on the back of unit labeled HOUSE CODE
using a small screwdriver.
2. Set the HOUSE CODE to any one of the following settings:
A B C D
NOTE: Make sure ALL your GE SmartHome™ devices have the same HOUSE CODE setting. The
transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / off).
If you experience interference, change the HOUSE CODE on all your GE SmartHome™
transmitters and receivers to a different setting.
3. Replace the HOUSE CODE tab.
4. Set the CHANNEL by using the knob on front as shown.
NOTE: If you set your Outdoor Receiver Module to CHANNEL 1,
the unit can be controlled using any transmitter set to CHANNEL 1. If you set your Outdoa Receiver
Module to CHAN NEL 2, the unit can be controlled using any transmitter set to CHANNEL 2... and so on.
IMPORTANT! A transmitter will control a receiver ONLY if they have the same
HOUSE CODE and CHANNEL settings.
5. Plug the Outdoor Receiver Module into a powered, grounded 125VAC outlet. Moke
sure the unit hangs freely and away from wet locations.
NOTE: The National Electric Code (and most local codes) requires that outdoor
outlets be protected by a Ground Fault Interrupter (GFI).
6. Plug the lamp / appliance you wish to control into the Outdoa Recover Module as shown.
The following are examples of devices you can control with your Outdoor Outlet Adapter:
o o ®
ki
FLœOUGHT SHEDUGHT HOUDAY UGH7ING
CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT OUTLET IS POWERED.
DO NOT CONNEa / DISCONNECT DEVICES TO / FROM THE OUTLET ONCE IT IS POWERED.
Operating Instructions - Key Chain Remote Control
1. Remove the battery compartment cover.
2. Set the HOUSE CODE to any one of the following settings:
3. Replace the battery compartment cover.
4. Set the CHANNEL by using the knob on front os shown.
NOTE: If you set your Key Chain Remote Control to CHAN NEL 1,
the unit con control any receiver set to CHAN NEL 1. If you set your Key Chain Remote Control to
CHANNEL 2, the unit can control any receiver set to CHANNEL 2.. and so on.
5. Use the toggle button to activate the Key Chain Remote Control (ON/OFF operation). Make sure
to press firmly and for a minimum of 1 second for best results. An indicator lights RED when a
signal is sent.
6. Using any of the receivers set to the some CHAN NEL and HOUSE CODE, test the installation by using
the ON and OFF buttons.
If your unit does not work properly or if you want additional assistance, please call 1-800-443-4924.
We would be happy to answer ALL of your questions. Visit us on the web at www.GESmortHomecom
to download applicatbn notes, manuals and to find out more about the GE SmartHome™ product line!
Spedfications
Key Chain Remote Control
Battery Type___________________________ Use ONLY A23 (12V) Alkaline
NOTE: The functional range will decrease as the battery wears out so moke sure to replace the
battery every 6 months for best results.
Outdoor Outlet Adapter
DONOTEXCEDELECTRICAL RATINGS
Electrical Rating ___________________________________ 120V, 60Hz
Maximum Resistive Load ______________________________ 1440W
Maximum Tungsten Load _____________________________ lOOOW
Maximum Motor Load ________________________________ 1/3HP
*Functional range may be ack/ersely affected by one or more of the following factors: weather, radio
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.
This device complies with Port 15 of the FCC rules. Operatbn is subject to the fallowing two conditions:
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.