GE 51137 GE Socket Receiver with Wall Switch Smart Remote Plus Compatible User Manual

O o o, User's manual, Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1

Ceiling Light Wall Switch Kit

User's Manual

Enclosed you will find
♦ ID Wall Mount Control
♦ Double-SidedTape/Screws

(for mounting)

♦ ID Socket Adapter

The GE SmartHome™ Plus advantage

Any transmitter in the GE SmartHome™

product line is capable of controlling every
receiver-the ultimate in home convenience.
Control any number of light fixtures or a ppliances
from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.

lIStEO

51137-2

12/5/06

General Electric Company

and is used under license to

Jasco Products Company LLC,

311 N.W. 122nd Street,

Oklahoma City, OK 73114

www.jascoproducts.com

^WARNING

Risk of electric shock
• Turn power off before inspection,

installation or removal

• Keep children away
• Use indoors only
• Do not use in wet locations
• Screw in securely
Risk of fire
• Do not exceed electrical ratings

The following GE SmartHome™ transmitters Isold separately) can control THIS receiver:

ik>-

$

Key Chain Remote

RFIOOTXPS

Wireless

Remote Transmitter

RF102TXPS

o

raOOK/WPS

PF6I3TX

The transmitters above can also control the fbllcw/ing GE SmartHome’” receivers (sold separately):

/ndoor

Recem Module

RnOORXPS

Outdoor Recem Module

RnOSRXRS

include

'^'

Socket Adapie(

Rfimm

Q

Wall Switch

RF102RXPS

IMPORTANT! These devices are NOT compatible with devices from other systems.

You must purchase GE SmartHome™ transmitters and receivers to ensure compatibility.

To extend the range ofthe

transmitters and receivers

inyour^stem,usethe

GE SmartHome™

Range Extender

(sold separately).

Range Extender

RFlOORm

Expanding your system

The G E SmartHome™ devices operate on any of 8 user-settable channels. The channels are easy to set /

adjust-with the simple turn of a knob. Set upyour 6 E SmartHome™ by purchasing as many transmitters
and receivers as you need. The following table isjust one example of howyou can configure your
SmartHome™ system:

Area

CH

Transmitters

Receivers

Bedroom

1

Bedside-Wall Mount Control
Entrance-Wall Mount Control

(2) Bedside Lamps - (2) Socket Adapters
Corner Torchiere -1 ndoor Outlet Adapter
Overhead Light Fixture - Wall Switch

Entertainment System -1 ndoor Outlet Adapter

Living Room

2

Coffee Table - Timer/Controller

Entrance-Wall Mount Control

(2) End Table Lamps - (2) Socket Adapters
Overhead Light Fixture - Wall Switch

Entertainment System -1 ndoor Outlet Adapter

Christmas Tree - Indoor Outlet Adapter

3

Window Santa - Indoor Outlet Adapter

Lighted Poinsettia - Indoor Outlet Adapter

Basement

4

Entrance-Wall Mount Control

(4) Overhead Can Fixtures - (4) Socket Adapters
(2) Fluorescent Fixtures - (2) 1 ndoor Outlet Adapters

Garage

5

Entrance-Wall Mount Control

(2) Huorescent Fixtures -(2) Outdoor Outlet Adapters
O/erhead Light Fixture - Wall Switch

Outdoor

6

Foyer-Wall Mount Control

Car Keys-K^ Chain Remote

Entiy Light-Wall Switch

Coach Lantern-Wall Switch

7

Christmas Lights - Outdoor Outlet Adapter
Yard Santa - Outdoor Outlet Adapter

Kitchen

8

Entrance-Wall Mount Control

Coffee Maker- Indoor Outlet Adapter

Operating Instructions ■ Socket Adapter

FOR INDOOR USE ONLY

ITurn the unit upside down and find the slot labeled HOUSE CODE.

2. Set the HOUSE CODE to any one of the following settings:

A B C D

NOTE: Make sure ALL you r GE Smart Home™ devices have the same HOUSE CODE setting. The transmitters

WILL NOT control the receivers if they have different HOUSE CODE settings.

IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on/ off).
If you experience interference, change the HOUSE CODE on all your GE SmartHome™ Plus transmitters

and receivers to a different setting.

3. Keeping the unit upside down, set the CHANNEL by using the knob as shown.

NOTE: If you set your Socket Adapter to CHAN NEL1, the unit can be controlled

usi ng any transmitter set to CHAN NEL 1. If you setyour Socket Adapter to
CHAN N EL 2, the unit can be controlled using any transmitter set to CHAN N EL 2... and so on

IMPORTANTIAtransmitterwillcontrol a receiver ONLY if they have the same
HOUSE CODE and CHAN NEL settings.

4. Remove power from the lamp socket.

5. Screw the Socket Adapter into a 125VAC socket.

6. Screw the light bulb you wish to control into the Socket Adapter as shown.

7. Apply power to the lamp socket.

The following ore examples of devices you can control with your Socket Adapter:

o o o

LAMP

ENERGy-SAmG ms

CBLINGim

CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT SOCKET IS POWERED.

DO NOT SCREW / UNSCREW BULBS INTO / FROM THE SOCKET ONCE IT IS POWERED.

Operating Instructions-Wall Mount Control

1. Find the slot labeled HOUSE CODE on the back of the unit.

2. Set the HOUSE CODE to any one of the settings shown.

3. Set the CHANNEL by using the knob on front as shown.

NOTE: If you setyour Wall Mount Control to CHANN EL 1, the unit can control

any receiver set to CHANNEL 1. If you setyour Wall Mount Control to
CHAN N EL 2, the unit can control any receiver set to CHANNEL 2.. and so on.

4. Mounting

NOTE: Mounting the Wall Mount Control on masoniy or metal walls may degrade the functional range.

Tape Mounting
A. Make sure surfaces are free of dust, oil and other substances that could affect adhesion.

B. Attach the double-sided tape to back of the Wall Mount Control housing.

C. Press tape firmly to the mounting surface.
Screw Mounting

A. Using a slotted screwdriver, remove the faceplate of the Wall Mount Control.

B. Place the detached back plate where desired and mark screw locations.

C. Insert the mounting screws into the back plate holes and screw into place.

D. Replace the Wa II Mount Control faceplate.

5. Use the toggle button to activate the Wall Mount Control (ON/OFF operation) Make sure

to press firmly and for a minimum of 1 second for best results An indicator lights RED when
a signal is sent.

6. Using anyof thereceiverssettothesameCHANNELond HOUSE CODE, test the installation by using the

ON and OFF buttons

If your unit does not work properly or if you want additional assistance, please call 1-800-654-8483. We would

be happy to anaver ALL of your guestions. Visit us on the web at www.GESmartHome.com to download
application notes, manuals and to find out more about the GE SmartHome™ product line!

Specifications

Wall Mount Control

Battery Type ........................................................................... Use ONLY A23 (12V) A(kaline

NOTE: The functional range will decrease as the battery wea rs out so ma ke sure to replace the battery

every 6 months for best results.

Socket Adpoter

FOR INDOOR USE ONLY
DO NOTEXCEEDELEGRICAL RATINGS

Electrical Rating .................................................................................................. 120V, 60Hz
Maximum Tungsten Load ................................................................................................. 200W

‘Functional range may be adversely affected by one or more of the following factors: weather, radio

freguency interference, lew transmitter battery and obstructions between the transmitter and receiver.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and:

2. This device must accept any interference received, includi ng interference that may cause undesired

operation.

CAUTION: Changes or modilications not expressly approved by the party responsible for compliance could

void the user's authority to operate the eguipment.

90 DAY LI MITE D WARRANTY; Jasco Products Company wo rrants this product to be free from manufacturing defects fer

a

period of ninety days from the

crig inal date of consumer pure hose. This warran V is limited

\o

the repair cr replacement of this product only and does not extend to consequential or

inc dental damoge to other products that may be used with this unit. Th is worranty is in lieu of all otherworranties express cr implied. Some states do
not allovv limitotions on hovv long an implied worranty losts cr permit the exc lusbn or limitaticn of inc dental or conseq uential damoges, so the above
limitotions may not apply to you. Thiswanrontygivesyouspecificrightsandyou mayolsohaveotherrightswhichvoryfromstatetostate. Ifunit
should pro/eaefectivewithin thewarranty perial. return prepaidwrth dated proof of purchase to:

Jasco Products Company. 311 N.W. 122nd, Oklahoma City. OK. 73114

Advertising
Table of contents