GE 51141 GE Outdoor Outlet Receiver Smart Remote Plus Compatible User Manual
User's manual, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Outdoor Outlet Adapter
Smart Remote Plus Receiver
User's Manual
Enclosed you will find
(1) Outdoor Outlet Adapter
The GE SmartRemote
Plus™ advantage
Any transmitter in the GE Smart Remote Plus
product line is capable of controlling every
receiver—the ultimate in home convenience.
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.
c(y^US
IISIEO
Call 1-800-443-4924
or visit usât
^WARNING
Risk of electric shock
Keep children away
Do not use in wet locations
Fully insert plug
When used outdoors, plug
intoGFCI protected outlet
Risk of fire
• Do not exceed electrical ratings
The following GE Smart Remote Plus transmitters (sold separately) can control THIS receiver;
O
□aa
aaa
aaa
Key Chain Remote Wall Mount Control Whole-Home Control Motion-Sensing Control Garage Control
RFIOOTXPS RF102TXPS RF2000KINPS
RF613TX COMING SOON!
The transmitters above can also control the following GE Smart Remote Plus receivers (sold separately):
Í
nclud
Í
d
^
B
Indoor Outlet Outdoor Outlet Socket Adapter
Wall Switch
Garage Adapter Dimmer Switch
RFlOOmS RF106RXPS RF104RXPS RF102RXPS COMING SOON! COMING SOON!
IMPORTANT! These devices are NOT compatible with devices from other systems.
You must purchase Smart Remote Pius transmitters and receivers to ensure compatibility.
To extend the range of the
transmitters and receivers
in your system, use the
GE Smart Remote Pius
Range Extender
(sold separately).
Range Extender
RFIOORXTX
Smart Remote Plus
• 1
Expanding your system
The GE Smart Remote Plus devices operate on any of 8 user-settable channels. The channels are
easy to set/ adjust-with the simple turn of a knob. Set up your GE SmartHome™ by purchasing as
many transmitters and receivers as you need. The following table is just one example of how you
can configure your Smart Remote Plus system:
Area
CH
Transmitters
Receivers
Bedroom
1
Bedside - Wall Mount Control
Entrance - Wall Mount Control
(2) Bedside Lamps - (2) Socket Adapters
Corner Torchiere - Indoor Outlet Adapter
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Living Room
2
Coffee Table - Timer/Controller
Entrance - Wall Mount Control
(2) End Table Lamps - (2) Socket Adapters
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Christmas Tree - Indoor Outlet Adapter
3
Window Santa - Indoor Outlet Adapter
Lighted Poinsettia - Indoor Outlet Adapter
Basement
4
Entrance - Wall Mount Control
(4) Overhead Can Fixtures - (4) Socket Adapters
(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters
Garage
5
Entrance - Wall Mount Control
(2) Ruorescent fixtures- (2) Outdoor Outlet Adapters
Overhead Ught Fixture - Wall Switch
Outdoor
6
Foyer-Wall Mount Control
Car Keys-Key Chain Remote
Entry Light-Wall Switch
Coach Lantern-Wall Switch
7
Christmas Lights - Outdoor Outlet Adapter
Yard Santa - Outdoor Outlet Adapter
Kitchen
8
Entrance - Wall Mount Control
Coffee Maker - Indoor Outlet Adapter
Operating Instructions
1. Remove the small tab on the back of unit labeled HOUSE CODE
using a small screwdriver.
2. Setthe HOUSE CODE to any one of the following settings:
B
D
NOTE; Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting. The
transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / off).
If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus
transmitters and receivers to a different setting.
3. Replace the HOUSE CODE tab.
4. Setthe CHANNEL by using the knob on front as shown.
NOTE; If you set your Outdoor Outlet Adapter to CHANNEL 1,
the unit can be controlled using anytransmitter setto CHANNEL 1. If you set your Outdoor Outlet Adapter
to CHANNEL 2, the unit can be controlled using any transmitter set to CHANNEL 2... and so on.
IMPORTANT! A transmitter will control a receiver ONLY if they have the same
(3
HOUSE CODE and CHANNEL settings.
gz,
sure the unit hangs freely and away from wet locations.
NOTE: The National Electric Code (and most local codes) requires that outdoor
outlets be protected by a Ground Fault Interrupter (GFI).
6. Plug the lamp / appliance you wish to control into the Outdoor Outlet Adapter as shown.
The following are examples of devices you can control with your Outdoor Outlet Adapter;
o
o
gp
FLOODLIGHT
SHED LIGHT
HOLIDAY LIGHTING
7. Using any of the transmitters set to the same CHANNEL and HOUSE CODE, test the installation by
using the ON and OFF buttons. An indicator light on the Outdoor Outlet Adapter lights RED when it
receives an ON signal.
CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT OUTLET IS POWERED.
DO NOT CONNECT/ DISCONNECT DEVICES TO / FROM THE OUTLET ONCE IT IS POWERED,
If your unit does not work properly or if you want additional assistance, please call 1-800-443-4924.
We would be happy to answer ALL of your questions. Visit us on the web at
to download application notes, manuals and to find out more about the GE SmartHome™ product line!
Specifications
DO NOT EXCEED ELECTFHCAL RATINGS
Electrical Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120V, 60Hz
Maximum Resistive Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1440W
Maximum Tungsten Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000W
Maximum Motor Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/3 HP
*Functional range may be adversely affected by one or more of the following factors: weather, radio
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.
This device complies with Part 15 of the FCC rules. Operation is subjectto the following two conditions:
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
Made in China for GE Home Electric Products, Inc.
Nela Park, Cleveland, OH 44112
Desc.: RF106RXPS