Dryer toe panel access, Door front panel access, Front panel access – Whirlpool Thin Twin User Manual

Page 17: Control panel access

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

Dryer Toe Panel Access

1. Remove the Transition Panel by removing the three (3) retaining

screws.

2. Using a putty knife, release the two (2) retaining clips and remove

the toe panel.

(Fig. 20)

Fig. 20

Door Front Panel Access

1. Remove the transition panel and the Toe Panel.

2. Flip down the Control Panel.

(Fig. 22)

3. Disconnect the Door Switch Wires.

4. Remove the Control Panel from the Front Pane! and set it on top of the unit.

(Fig. 23)

Door

Switch

Wires

Screws

Fig. 22

Advertising