Washer timer, Water level switch – Whirlpool Thin Twin User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To test the water level switch, remove the wires from the water level switch.
With the tub empty, there should be continuity from violet to pink and no continuity between violet and
tan.
With the tub full, there should be continuity from violet to tan and no continuity from violet to pink.
WATER LEVEL SWITCH
WASHER TIMER
To test the timer contacts, select the contacts to be tested; in this case, contact 10.
Using the cycle sequence chart as a reference, turn the timer to the position where the contacts will be
closed.
T
»
T
LS.
of
CQ
1
>
i
g
I
£
éK
Wfil
5
a:
ILT
MACHINE FUNCTION
X
O
£
»
X
FILL-AQITAIE
WASH HI
gi
...fe
14 TUB DRAIN
DRAIN Hi
Mi
-1.
AGITATE HI
FILL
-J-
6
There should be continuity between the contacts.
Turn the timer to a position where the contacts
are open.
There should be no continuity between the contacts.
21