GE VG4275 - Manual (Page 20)

SETTING UP THE VCR
The VCR will only respond to the compatible remote's
VCR2, VCR2*LD, or VCR2*DVD button. If you change the
remote setting to VCR2, the remote that came with your
VCR will no longer control it.
Use the compatible remote to change the remote setting
back to VCR1. Display the PREFERENCES menu, press 1,
and then press VCR on the VCR's remote.
Auto Play
This feature allows the VCR to automatically start playing
when you insert a tape with the safety tab removed. In the
PREFERENCES menu, press 2 to switch between ON or OFF.
• Select ON if you want a tape with its safety tab
removed to start playing automatically when the tape
is inserted.
• Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
Auto TV/VCR
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode. Press 3 to switch between
ON and OFF.
• Select ON if you want the VCR to switch to the VCR
mode when the VCR is turned on or a cassette is
inserted. This only applies if you connect the ANT. IN
and OUT TO TV jacks of your VCR to your TV and
watch your VCR on channel 3 or 4 of your TV.
• Select OFF if you want the VCR to remain in the TV
mode. This is useful if you watch your VCR on the TV's
video input and you don't want your antenna/cable
signal interrupted by the VCR. Refer to the Connections
section, toward the back of the manual.
Auto Play
For a tape to be able to start playing
automatically, it must have the
safety tab removed. All rented
movies and purchased movies
should have this tab removed.
Auto TV/VCR
Pressing TV«VCR will still switch
between the VCR and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
18