GE VG4275 - Manual (Page 26)

VCR BASICS
MUTE Reduces volume to minimum level.
Numbers (0 through 9) Select a channel up to 99 by
pressing two numbers. Select a cable channel over 99 by
pressing and holding 1 until 1 - - appears on the screen.
Then press the other two numbers.
ON»OFF Turns a compatible TV off and on.
VOL Up and Down Raises and lowers sound of TV.
Playing a Tape
1. Tune the TV to your VCR viewing channel (3, 4, or TV's
video input- see "How to Find Your TV's Video Input
Channel" in the References section of this manual for
more about the video line input).
2. Insert a tape in the VCR.
The VCR display indicates that the unit is in VCR
mode, suitable to watch a tape.
If the Auto Play feature is set to ON, the tape
automatically begins playback (if the safety tab on the
cassette is removed).
Press FWD on the VCR (FORWARD on remote) or REV
on the VCR (REVERSE on remote) to position the tape.
Press PLAY PAUSE (if necessary) on the VCR (PLAY on
remote) to begin tape play.
Press PLAY PAUSE (PAUSE on remote) for stop action.
Press TRACKING up or down to remove any streaks
from the picture, if necessary.
Press STOP*EJECT on VCR (STOP on remote) to stop
playback.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
J
Automatic Tracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking
is turned on whenever a tape is
inserted or the VCR's power is
turned on.
24