Setting up the vcr, Energysaver, Front panel brightness (vcr display) – GE VG4275 User Manual
Page 21: Preferred tape speed, Set auto repeat
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING UP THE VCR
EnergySaver
By default, this VCR automatically turns off after two hours
of inactivity. In the PREFERENCES menu, press 4 to
change the time delay, or to disable the feature.
•
OFF: The VCR will remain turned on until you shut it
off.
•
1:00, 2:00, or 3:00: The VCR turns off after one, two, or
three hours of inactivity.
Thirty seconds before shutting off, the VCR will warn you
with a screen reading, "The VCR will turn off in 30
seconds. Press any key to cancel."
If you use the VCR's tuner instead of your TV to tune
channels, you may want to turn this feature off.
P R E F E R E N C E S
1
R e m o t e C o n t r o l :
U C R 1
г
f l u t 0 P l a y :
O N
3 A u t o T V / V C R :
O N
4
E n e r g y S a v e r :
2 : 0 0
5
F r o n t P a n e L :
A U T O
6 T a p e S p e e d :
S L P
7
S e t A u t o R e p e a t
0
E x i t
The PREFERENCES menu allows access
to settings for the remote control, energy
saving mode, front panel brightness, and
more.
Front Panel Brightness (VCR Display)
The brightness level of the fluorescent display panel on
the front of the VCR can be to be less or more bright. In
the PREFERENCES menu, press 5 to switch between the
options.
•
AUTO brightens the display when the VCR is on and
dims the display when the VCR is off.
•
BRIGHT keeps the display bright.
•
DIM keeps the display at a low brightness level.
Preferred Tape Speed
You can set the preferred tape speed between Standard
Play (SP) and Super Long Play (SLP). In the PREFERENCES
menu, press 6 to toggle between the options.
•
SP sets the preferred recording speed to SP.
•
SLP sets the preferred recording speed to SLP.
Set Auto Repeat
A tape can be set to play the same segment over and over
in a repeating loop with the Set Auto Repeat feature. Set
Auto Repeat uses the VCR's memory counter to determine
the duration of the loop.
Continued on Next Page
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in
this speed.
SLP (Super Long Play)
Gives three times the recording time
of tapes recorded in SP. Special
effects such as pause, slow motion,
picture search, and frame advance
work well when you play back tapes
recorded in this speed.
Recording Time
Cassette SP
SLP
T-120
2 hr
6 hr
T-160
2 hr/40 min
8 hr
19