GE VG4275 - Manual (Page 57)

APPENDIX: REFERENCE
Display Panel
REC Indicator (REC) Lights up and replaces the time display when the VCR is recording.
Time, Channel Number, Line Input Indicator (LI or L2), Tape Speed Indicator, or Status
Indicator
Channel Number or Line Input Indicator The channel number appears when the VCR is
tuned to a channel. The line indicator (LI or L2) appears when the VCR's line input is selected.
Select LI to record from the jacks on the back of the VCR or select L2 to record from the jacks on
the front of the VCR.
Status Indicators Show what the VCR is doing.
EJEC (Eject) Cassette ejected
FF Fast forwarding
HI VCR turned on and BYE VCR turned off
PLAY In playback
REC Recording and RECP For record-pause mode
REW Rewinding
R0:00-R4:00 Express recording in progress (zero to four hours in half-hour increments)
SAFE ProTect Plus feature turned on
SCH and SCH- Forward or reverse search
SLW In slow playback
STILL Play-pause
STOP Tape is stopped
Tape Inserted indicator (GO) Appears on the front panel display any time a videocassette is
inserted into the VCR. This icon will flash if a timer recording has been set, power turned off on
the VCR, but no tape inserted.
Tape Speed Indicator (SP and SLP) Press SPEED on the remote control to change.
Time The current time appears. Only an AM indicator appears with the time. There is no
indicator for PM.
TIMER Lights during express recording and when VCR is set for a timer recording and then
powered off.
VCR Indicator (Applies only if the VCR Viewing Channel is 3 or 4). Press the TV*VCR button to turn
on or off.
• VCR indicator on: TV is viewing signals from the VCR.
• VCR indicator off: TV is viewing signals from an antenna, satellite or cable system.
55