GE JT930 - Manual (Page 31)

M/iwK GEAppliances. com
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
6
/
Select FEMTUBES.
Select SELF CLEAN. Select upper or
lower oven <'>n double oven models.
Select the desi.ied self clean,,
,A. 3-hour self-clea.ii ti„me :i,s
recoil]mended when cleaning small,
contained spills.
A. self-clean time of
4 hours or longer is recommended
for a dirtier oven.
LO (.3 hrs) will self clean, the oven
for 3 hours.
STB (4 hrs) will self dean the oven
for 4 hours.
ADJUST TIME-¡Mem’S oven to be set
ft.ir an)" rime between 3 and 5 hours.
Input the clean time (to nearest 5
mim.ites) using the number pads
a nd select ENTEB.
Select BELAY CLEAN.
Using the number ¡rads, enter the
time of dayt'ou want the clean cv'cle
to start.
Select ENTEB.
Select STABT.
Tlie door locks automaticall)' when )'i.>t.i
select
START. The oven will remain
locked. The display will show the start
time. Once the self-dean cycle starts, it
will not be possible to open the oven,
door until the tempeiature drops below
tlie lock temperature a,n,d tlie i gx,)es off.
When i g(jes off, you will be able to
open the door.
NOTE: On double oven models, you can seta
delay clean in both ovens. However, the second
oven set will automatically delay the start of
cleaning until the end of the first oven s clean
cycle.
I
I
I'
(A
CB
ss
Ci.
£2
CD*
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with a
soap-filled steel-wool pad and rinse thoroughly
with a vinegar and water mixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean after one dean
r\'de, repeat the cycle.
* Y)U cannot set the oven for rooking
until the oven is cool enough for the
door to unlock.
If the racks become hard to slide, wipe
the rack supports with cooking oil.
Q
S-
§>
o
o
gj>
f
(A
I
I
3i