Care and cleaning of the oven, How to remove packaging tape, Oven light bulbs – GE JT930 User Manual
Page 37: To remove, To replace, Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
I
I'
(A
How to Exit the Sabbath Feature
m
Touch the
CLEAlVOFFpad
to make
sure that the oven is turned
OFF.
No
audible signal will be given.
Hold the
BACKkey
for
?)
seconds. No
audible signal will be given. This will
take the oven control out of the
Sabbath feature. The control will
return to the Featui es menu wheie
SABBATH
wus originally selected.
Select
HOME to
return to the main
menu on the control disjrlay.
Care and cleaning of the oven.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.
How to Remove Packaging Tape
To assure no damage is done to the finish
of the product, the safest wa)’ to remove
the adhesive left from packaging tape
on new' appliances is an application
of a household liquid dishw'ashing
detergent, mineral oil or cooking oil.
Ajjply with a soft doth and allow to soak.
Wipe dr)’ and then apply an appliance
polish to thoroughly clean and protect
the surface.
NOTE:
The plastic tape must be removed from all
chrome trim. It cannot be removed if it is baked on
Oven Light Bulbs
NOTE:
The glass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION
Before replacing your
oven light bulb, disconnect the electrical
power to the oven at the main fuse or
circuit breaker panel.
Be sure to let the light cover and bulb
cool comr
For your safety, do not touch a bulb with
bare hands or a damp cloth. It can also
shorten the bulb life.
To remove:
m
Turn the glass cover
counterclockwise 1/4 turn until the
tabs of the glass cover cleai’ the
grooves of the socket.
Using gloves or a diy cloth, remove
the bulb by pulling it straight out.
To replace:
Use a new' 130-volt Halogen bulb,
not to exceed .50 w'atts.
/
Using gloves or a dry' cloth, remove
the bulb from its packaging.
Do not
touch the bulb with bare fingers.
Push the bulb straight into the
receptacle all the way. Then replace
the screen.
NOTE:The
scieen must
be l eplaced or the life of the bulb
will be reduced.
Place the tabs of the glass cover into
the grooves of the socket. Turn the
glass cover clockwise 1/4 turn.
For improved lighting inside the
oven, clean the glass cover
frequently using a wet doth. This
should be done w'hen the oven is
completely cool.
^
Reconnect electiical pow'er to „ _
the oven.