4G Systems XSJack T3e - Manual (Page 12)

12
Call waiting, call holding and conferences
During active calls there are a number of possibilities to establish con-
nections with multiple participants. To be able to receive a second call
during an ongoing one, call waiting must be generally allowed by acti-
vating it once using code
W1.
At different stages during active connections, there are different possi-
bilities to manage multiple calls, which can be performed using the
hookflash button (R) on your telephone.
During an active call you can set up a second one:
If call waiting is activated, you will hear a signal when a new call
arrives. At this time you can choose between:
If you have one active call and one call on hold, the following actions
can be performed:
Description Format
W1
Activate call waiting * 43 #
W2
Deactivate call waiting # 43 #
W3
Query call waiting setting * # 43 #
Description Format
H1
Set active call on hold to establish second call R
H2
Skip establishment of second call
H1, get
back to held one
R or hang up
Description Format
H3
Reject waiting call R 0
H4
Take waiting call, end active call R 1
H5
Take waiting call, put active call on hold R 2
Description Format
H6
End held call R 0
H7
End active call, switch to held one R 1 or hang up
H8
Toggle between active call and held one R 2
H9
Establish three-party conference R 3