4G Systems XSJack T3e - Manual (Page 14)

14
Fax operation
The XSJackT3 is designed to send and receive faxes via the GSM net-
work in combination with a connected fax machine. In order to opti-
mize the reliability of fax transmissions, the XSJackT3 has an internal
memory to buffer incoming and outgoing fax pages.
Fax setup
To activate fax functionality, the fax configuration procedure must be
carried out once using code
F1. This function will initiate a fax call to
the connected fax machine in order to exchange some significant para-
meters and will then print out a fax configuration protocol. On receipt of
a successful protocol, the device is ready to send and receive faxes.
Repeat the fax configuration when another fax machine is connected,
settings of the fax machine were changed (e.g. caller ID), or the
XSJackT3 has been resetted.
Fax transmission
To send a fax, proceed as you are used to: insert a document into the
fax machine, dial the destination number on the keypad and press
'Start' (or similar). Due to the internal memory, fax transmissions are
always double-staged. First, the connected fax machine sends the fax
to the XSJackT3, afterwards the XSJackT3 sends it to the destination
fax machine.
Hence it is important to understand that an acknowledgment of the
successful transmission from your fax machine does not actually
mean, that the document has been delivered to its final recipient.
During the second stage, when the XSJackT3 submits the fax to the
remote party, the red status LED is on to indicate an active connection.
The transmission can be aborted by using code
F3 or dialling an emer-
gency number. When the XSJackT3 has finished the transmission, it
will send a report to your fax machine. For successful transmissions
this confirmation can be suppressed using code
F5.
Description Format
F1
Initiate fax configuration and enable fax
reception * 10 #
F2
Recall current fax configuration protocol * # 10 #