5 . f/t ring time, Ring i 1mb: z[) slc j ■ select < > & set, Remote activation – Brother IntelliFax-680 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECEIVING FAXES AND OTHER CALLS
3 . P]-esi:i 5.
4. Press <— (left arrow) or —► (right
arrow) repeatedly until you find
the setting you want.
Example: lOsec.
5. Press
SET.
6. Press
STOP
to exit.
[ 5 . F / T R I N G T I M E
(
R I N G I 1 M b
:
Z[)
SLC J
■ S E L E C T < > & S E T ;
I M E : 1 0
i 5 . F / T ~ R I N G T I M t .... I
Remote Activation
If you are using a tone dialing line, you can remotely activate or deactivate your fax machine from
an external phone (a phone connected to your fax machine) or from an extension phone (a phone
connected to the same line as your fax machine).
Connecting an External or Extension Telephone to the Unit
You may connect an external or extension telephone to your fax machine, as shown below. Use
the '‘EXT.” jack on your fax machine.
Alternatively, you may wish to use this “EXT.” jack to connect a telephone answering device
(TAD).
When the external telephone is in use, if the handset on the fax machine is picked up, an alarm
will sound and the warning message “EXT. TEL IN USE” will be displayed. You can disconnect
the external phone and switch to fax machine by pressing HOOK.
7-4