Installing the optional memory board – Brother MFC7650MC User Manual
Page 191
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
V - / I I I V - / 1 H / \ l _
Installing the Optional Memory Board
1. Unplug the power cord from the AC
outlet and disconnect the interface
cable.
WARNING------------------------------------------------------------- ------------------------------
Unplug the power cord before installing (or removing) the memory board.
2. Unscrew the three screws securing
the main controller board plate and
pull out the board.
WARNING------------------------------ --------- -----------------------
Do not touch the surface of the main controller board.
3. To install the memory board onto
the main controller board, use the
attached spacer and plug it into the
lower right connectors of the mam
controller board.
179