Ijtjli. \w,\tliasics 0tlnuln<c7 haxhii, A) document basics – Brother MFC7650MC User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
iJtjLi. \w,\TliASics
0tlNUlN<c7 hAXhii
5. SENDING FAXES
A) DOCUMENT BASICS
The Size of Your Documents
The size of the documents you want to send by fax should not be larger (or smaller)
than your MFC can accommodate. The documents should each be between 5.8 and 8.5
inches (148 and 216 mm) wide and between 3.9 and 35.4 inches (100 and 900 mm)
long.
The maximum width of the scanned area, that can be printed on the recording paper
of the recipient’s fax, is 8.2 inches (208 mm).
How to Insert the Document
To send a fax, first insert the document you wish to send, face down,
in the document feeder. The top edge of the document should go in
first, or the fax will be received upside down.
To prevent the document from skewing as it is fed, adjust the paper
guides
to fit the width of the document.
M
I
dOl