Brother MFC7650MC - Manual (Page 200)

Brother HL-6/6V/10h/630series/660series/960/1260AVL-660
HP LaserJet series II, IID, IIP, IIP+, III, HID,HIP or IV Plus
NEC Superscript 610/660
EPSON ActionLaser 1100/1400
LexMark WinWriter 200
Brother HL-6/6V/10h/630series/660serles/960/1260/WL-660:
The Resource Manager for MFC 7650MC may not work if the printer driver for the
above models are installed after the installation of the MFC 7650MC printer driver.
In this case, please install the MFC 7650MC printer driver again or copy BI-DI.386
from the CD-ROM to the Windows/System directory. (NOTE: BI-DI.386 onX; \ 7650 \ 16-
BIT \MFLPRO\ FULL \ DISK 1 is not compressed.)
HP LaserJet series II, IID, IIP, IIP+, III, HID or HIP:
If Microsoft Windows® Printing System for above models are used, you have to modify
the “win.ini” file which is in the Windows directory to turn the printer’s bi-directional
function off.
We recommend you to have back-up before you modify the WIN.INI or SY3TEM.INI,
just in case.
Open the file “win.ini” by using the “notepad” application. You can find the following
statement in the [spooler] section,
[spooler]
QP.LPTl = wpsljqp.dll
To disable this function, put a semicolon at the head of above sentence as follows;
[spooler]
;QP.LPT1 = wpsljqp.dll
Then, open the file “system.ini” by using the “notepad” application. You can find the
following statement in the [386Enh] section.
[386Enh]
device=wpsljvpd.386
WPSLPT1=1
To disable this function, put a semicolon at the head of above sentences as follows;
;device=wpsljvpd.386
;WPSLPT1=1
You must restart Windows® to make these modification eflective.
The modification disables the printer status reporting on your PC, however, you will
be able to use the MFC 7650MC with no further problems.
188