Stopping call forwarding, Setting do not disturb, Activating do not disturb – Cisco 509G User Manual
Page 45
Using Basic Phone Functions
Setting Do Not Disturb
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP)
38
3
STEP 3
Press ok.
STEP 4
Press save.
Stopping Call Forwarding
To stop forwarding calls, press the -cfwd softkey.
You can also stop call forwarding by pressing the Setup button and selecting Call
Forward > edit. Press clear, then press ok. Press save.
Using star codes:
•
Enter *73 to deactivate call forwarding.
•
Enter *91 to deactivate call forward busy.
•
Enter *93 to deactivate call forward no answer.
Setting Do Not Disturb
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
You can also set Do Not Disturb from your PC using the IP Phone Web Interface;
see the
“Setting Do Not Disturb” section on page 68
NOTE
For the SPA501G, you can only set Do Not Disturb in the IP Phone Web Interface or
by using the star code.
Activating Do Not Disturb
Using the dnd softkey:
To activate Do Not Disturb, press the dnd softkey. The LCD screen indicates that
Do Not Disturb is turned on for your phone.