Changing the lcd contrast, Configuring the phone screen saver, Configuring – Cisco 509G User Manual
Page 81
Using the Web Interface
Changing the LCD Contrast
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP)
74
5
Changing the LCD Contrast
NOTE
Not applicable to the SPA501G.
STEP 1
Log in to the web interface.
STEP 2
In the Voice tab, click the User tab.
STEP 3
Under Audio Volume, you can adjust the LCD contrast by entering a number
between 1 and 10, with 1 being low contrast.
STEP 4
Click Submit All Changes.
Configuring the Phone Screen Saver
NOTE
Not applicable to the SPA501G.
To configure the phone screen saver:
STEP 1
Log in to the web interface.
STEP 2
In the Voice tab, click the Phone tab.
Under General, you can configure the following:
•
Screen Saver Enable: Turns the screen saver on and off.
•
Screen Saver Wait: The number of seconds that the phone is idle before the
screen saver starts.
•
Screen Saver Icon: The display type:
-
A background picture.
-
The station time in the middle of the screen.