Cisco 509G - Manual (Page 91)

Using the SPA500S Attendant Console
Configuring the SPA500S
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 84
6
Configuring the SPA500S
The SPA500S can be configured to easily access other phone lines in the system.
For example, buttons on the 500S can be configured to monitor another extension,
speed dial a number, transfer calls to another extension, and more.
NOTE The options available on the SPA500S depend on the phone system configuration.
Your phone system might not provide all of the features mentioned in this
document.
Configuration of the SPA500S and assignment of the line buttons is performed by
the system administrator and is not described in this document. To configure the
SPA500S:
• If the SPA500S and attached IP phone are part of a Cisco SPA9000 Voice
System, we recommend that you use the SPA9000 Setup Wizard. For
instructions on using the Setup Wizard, see the
System Configuration Using
the SPA9000 Setup Wizard document on Cisco.com. See Appendix B,
“Where to Go From Here” for the link to this document.
• If you want to manually configure the SPA500S using the web user interface
for the IP phone to which the SPA500S is attached, see the Cisco SPA and
Wireless IP Administration Guide on Cisco.com. See
Appendix B, “Where
to Go From Here” for the link to this document.
• If the SPA500S and attached IP phone are used with a Broadsoft or Asterisk
server, see the Cisco SPA and Wireless IP Administration Guide on
Cisco.com. See
Appendix B, “Where to Go From Here” for the link to this
document.