Cisco 509G - Manual (Page 74)

Using the Web Interface
Logging in to the Web Interface
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 67
5
Logging in to the Web Interface
STEP 1 Get the IP address of your phone:
SPA502G, SPA504G, SPA508G, SPA509G:
a. Press the Setup button.
b. Scroll to network and press select.
c. Scroll to view Current IP. This is the IP address of your phone.
SPA501G:
a. Press the Setup button.
b. Enter 110, then press #. The IP address is recited.
STEP 2 On your PC, open Internet Explorer.
STEP 3 Enter the IP address in the browser’s toolbar.
The web interface has four main tabs:
• Voice—Contains information about your phone, including the following sub-
tabs:
- Info—Contains system and phone information (read only).
- System—Allows you to configure a password and network settings.
- Phone—Allows you to enable the screen saver.
- User—Contains settings for call forwarding, speed dials, call waiting,
privacy settings, and audio settings.
• Call History—Displays calls received and made from your phone.
• Personal Directory—Contains your personal address book.
• Attendant Console Status—Provides information about Cisco SPA500S
attendant consoles, if installed.