Cisco 509G User Manual
Page 90
Advertising
Using the SPA500S Attendant Console
Connecting the SPA500S Attendant Console to the IP Phone
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP)
83
6
!
CAUTION
Do not plug a telephone line cord into the AUX port. Use only the auxiliary cable
provided with the SPA500S.
STEP 7
Locate the AUX OUT port on the back of the first SPA500S. Connect one end of
the auxiliary cable to this port.
STEP 8
Locate the AUX IN port on the back of the second SPA500S. Connect the other
end of the auxiliary cable to this port.
STEP 9
Route the auxiliary cable inside the cable slot. The SPA500S is powered by the
auxiliary cable with the IP phone; no additional power source is required.
STEP 10
Attach the appropriate desktop stands to each unit.
Advertising