Cisco 5000 Series - Manual (Page 125)

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
C-5
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Appendix C Cable and Port Specifications
Supported Power Cords and Plugs
The console port is an asynchronous RS-232 serial port with an RJ-45 connector.
Console Port Pinouts
Table C-2 lists the pinouts for the console port on the Cisco Nexus 5020 switch and the Cisco Nexus
5548 switch.
Table C-3 lists the pinouts for the console port on the Cisco Nexus 5010 switch.
Supported Power Cords and Plugs
Note This section applies to the Cisco Nexus 5548 switch, the Cisco Nexus 5020 switch, and the Cisco Nexus
5010 switch.
Each power supply has a separate power cord. Standard power cords or jumper power cords are available
for connection to a power distribution unit having IEC 60320 C19 outlet receptacles. The jumper power
cords, for use in cabinets, are available as an optional alternative to the standard power cords.
Table C-2 Console Port Pinouts for the the Cisco Nexus 5020 switch and the Cisco Nexus 5548
switch
Pin Signal
1 RTS
2 DTR
3 TxD
4 GND
5 GND
6 RxD
7 DSR
8 CTS
Table C-3 Console Port Pinouts for the Cisco Nexus 5010 Switch
Pin Signal
1 RTS
2 DTR
3 TxD
4 GND
5 GND
6 RxD
7 DSR
8 CTS