Cisco 5000 Series - Manual (Page 126)

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
C-6
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Appendix C Cable and Port Specifications
Supported Power Cords and Plugs
This section includes the following sections
• Power Cords, page C-6
• AC Power Cord Illustrations, page C-7
Power Cords
The standard power cords have an IEC C13 connector on the end that plugs into the switch. The optional
jumper power cords have an IEC C13 connector on the end that plugs into the switch, and an IEC C14
connector on the end that plugs into an IEC C13 outlet receptacle.
Note Only the regular power cords or jumper power cords provided with the switch are supported.
Table C-4 lists the power cords for the Cisco Nexus 5020 switch and provides their lengths in feet and
meters.
Table C-4 Power Cords for the Cisco Nexus 5020 Switch
Description
Length Power Cord
Reference
Illustration
Feet Meters
SFS-250V-10A-AR

Power Cord, 250 VAC 10 A IRAM 2073 Plug

Argentina
8.2 2.5 Figure C-4
CAB-9K10A-AU

250 VAC 10 A 3112 Plug,

Australia
8.2 2.5 Figure C-5
SFS-250V-10A-CN

Power Cord, 250 VAC 10 A GB 2009 Plug

China
8.2 2.5 Figure C-6
CAB-9K10A-EU

Power Cord, 250 VAC 10 A M 2511 Plug

Europe
8.2 2.5 Figure C-7
SFS-250V-10A-ID

Power Cord, 250 VAC 16A EL-208 Plug

South Africa, United Arab Emerits, India
8.2 2.5 Figure C-8
SFS-250V-10A-IS

Power Cord, 250 VAC 10 A SI32 Plug

Israel
8.2 2.5 Figure C-9
CAB-9K10A-IT

Power Cord, 250 VAC 10 A CEI 23-16 Plug

Italy
8.2 2.5 Figure C-10
CAB-9K10A-SW

Power Cord, 250 VAC 10 A MP232 Plug

Switzerland
8.2 2.5 Figure C-11