Cisco 5000 Series - Manual (Page 64)

S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
2-32
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Chapter 2 Cisco Nexus 5000 Series Overview
Cisco Nexus 5010 Switch
SFP+ Transceivers
The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver module is a
bidirectional device with a transmitter and receiver in the same physical package. See
Table 2-11 . It has
a 20-pin connector on the electrical interface and duplex LC connector on the optical interface.The Cisco
Nexus 5010 switch supports the following SFP+ optical transceivers:
• SR
• DCR, SR-Lite (shorter reach than SR)
• LRM (for uplink only)
• LR (for uplink only)
Table 2-11 SFP+ Transceivers
SFP+ Copper Cables
Copper cables are available for use with the 10-Gigabit Ethernet SFP+ module. See Table 2-12 . The
cables come in the following lengths:
• 1m, 30AWG
• 3m, 28-30 AWG
• 5m, 26-28 AWG
Table 2-12 SFP+ Copper Cables
SFP Fiber Channel Transceivers
The Cisco Nexus 5010 switch supports the multimode 850nm 4Gbps SFP with 150m reach. See
Table 2-13 .
Table 2-13 SFP Fiber Channel Transceiver
s
Model Description
SFP-10G-SR 10-Gigabit Ethernet—Short range SFP+ module
SFP-10G-LR 10-Gigabit Ethernet—Long range SFP+ module
Model Description
SFP-H10GB-CU1M 10GBASE-CU SFP+ cable (1 meters)
SFP-H10GB-CU3M 10GBASE-CU SFP+ cable (3 meters)
SFP-H10GB-CU5M 10GBASE-CU SFP+ cable (5 meters)
Model Description
DS-SFP-FC4G-SW 4 Gbps Fibre Channel-SW SFP, LC
DS-SFP-FC4G-LW 4 Gbps Fibre Channel-LW SFP, LC, (10 km reach)